Small Floor Space Footprint
Enhanced EN16500 Safety Features
Bale and Compact Cardboard & Plastic
Suitable for Kitchens & Clean Environments
Super Fast Pressing Cycle & Bale-out Indicator
The Mil-tek 2205S is a stainless steel waste baler suitable for compacting cardboard, plastic and other waste materials. As is it stainless steel, it is ideal for hygienic environments such as industrial kitchens and food production facilities. The stainless steel allows for 2205S baler to be easily cleaned and maintained, while withstanding the chronic rust and corrosion that affects hydraulic and non stainless steel machines.
The 2205S has a floor space footprint of just 42cm2, making it one of the smallest footprint vertical balers on the market. Despite this, it can create a bale upwards of 120kg. This makes the 2205S ideal for compact, indoor locations where space is at a premium: Kitchens, food preparation areas, storage rooms and waste rooms must all carefully manage space to suit the workflow.
Food producing and food processing businesses that rely on hygienic environments will find the 2205S baler an invaluable addition to their workplace, which excess packaging can be baled at source. One or more strategically placed balers eliminate the need for frequent trips to outside disposal areas.
The Mil-tek 2205S waste baler is fully compliant with the new EN16500 safety standard, making it another addition to Mil-tek's line of EN compatible machines. Despite have a 24 year, zero accident history, we've made further improvements to our machine designs to enhance the operational and safety features.
In addition to enhanced safety features, the 2205S features a faster pressing plate that delivers a full pressing cycle in under 7 seconds. A cycle counter allows users to track the number of cycles the waste press goes through over time, and a bale-out indicator shows when the machine is full. These features facilitate ongoing maintenance and upkeep of the machine.
As with all EN16500-compliant balers, the Mil-tek 2205S waste baler is powered exclusively by compressed air. This means that the 2205S vertical baler is free of electrical and hydraulic components, making it cleaner, safer and more efficient.
Agro Korn produce animal feed. This is the type of industry a 2205S is ideally suited for, as it is a food producing environment where hygiene is key, and particles in the air can cause corrosion.
Mitre 10 are a hardware supplies chain based in New Zealand. A combination of Mil-tek machines allows Mitre 10 to compact large volumes in small vertical balers.
Puratos supply ingredients for the catering industry. They use a Mil-tek 205 allowing them to hygienically compact paper bags in the working area as they are used, saving them time and money and improving efficiency.
Mil-tek will take care of installation. The 2205S simply requires an air line to operate. Once connected, you are ready to bale.
Fill the chamber with cardboard or plastic and close the door. The door handle acts as a safety, only activating once it is securely full. Keep an eye on the bale-out indicator so you can tell when the baler is full.
When the bale-out indicator remains red, it is time to bale-out. Tie off the bale using a simple loop-knot, open the lower door and release the bale. You are now ready to start baling again!
A stainless steel baler is suitable for a range of tough and durable environments. As well as preventing rust and corrosion, it can easily be installed into hygienic locations such as food preparation or food production areas.
In addition, it can bale and compact a wide range of material, including non recyclable waste.
Yes it is. Over the past number of years Mil-tek have been a part of a Health and Safety Executive committee that has been committed to creating new improved standards for the safe use of vertical balers. As a result we have made a number of improvements our balers in order to comply with the safety standards of EN16500.
For more information on the changes we've made, click 'Why Mil-tek' and read the page dedicated to EN16500.
The 2205S stainless steel baler is powered exclusively by compressed air. Thus this low energy recycling machine is free of hydraulic oil and contaminants making it safer, cleaner and quieter than a hydraulic compactor.
Mil-tek balers require an annual service to ensure they are operating optimally.
Mil-tek first started manufacturing balers in 1992, and many of our machines are still operational today! Given proper care, service and use, it should last for many years.
By virtue of being both stainless steel and pneumatic, the 2205S is infinitely more suitable to industrial kitchens that a hydraulic baler. Offering hygienic, contaminant free usage, the 2205S can comfortably handle the heat, moisture and conditions of a busy working kitchen.
The deep vertical chamber allows for large bales, despite a small floor space footprint.
Food production facilities generate a steady volume of packaging material throughout the day. A small footprint 2205 Stainless steel baler can be installed neatly indoors alongside the production, allowing for a seamless waste disposal-waste creation process.
As a result, the work place is better optimized, The result is fewer collections, less time spent transporting waste, less space designated to waste and an overall reduction in waste costs.
|Plastic: < 120 kg
|Cardboard: < 60 kg
|Degree of Compression
|< 70 dB (A)
|2250 kg at 8 bar