Browse the range of Mil-tek Polystyrene Compactors for compaction and recycling of expanded polystyrene (EPS6).
Select any machine to download a brochure.
Just complete the form below and we'll contact you to answer any questions you have.
The Mil-tek X-Press 200S stainless steel waste compactor is extremely flexible and suitable for a wide variety of locations including kitchens, food preparation sites, hospitals, offices, and general waste areas.
By compacting your general, food and hazardous waste in an X-Press 200S waste compactor, you optimize your waste area, creating more space, less mess, better hygiene and solve the problem of overflowing bins. You also reduce the number of bins and collections by 80%, reducing the cost and improving the internal logistics and productivity of your organisation.
A compaction ratio of up to 10:1 has a significant impact on waste costs by reducing number of waste containers and frequency of hauls.
The Mil-tek X-Press 200S is powered by compressed air, either directly from an existing air-line or from a compressor supplied by Mil-tek. This means that the Mil-tek X-Press 200S is free of both electrical and hydraulic components, minimizing the risk of fire and completely eliminating the risk of oil contamination.
Super Brugsen is a supermarket chain with more than 220 stores in Denmark. They use two mobile wagons in their food production are for both their biodegradable and recyclable waste.
Ruby Tuesday have revolutionised their waste handling process with the help of a both a Mil-tek cardboard baler and general compactor, reducing their waste and improving back-door security.
IHOP is a US restaurant chain specialising in breakfast foods. They partnered with Mil-tek to reduce their trash volume and pick-ups and recycle their cardboard.
A Mil-tek technician will guide you through installation, which is done by simply connecting your X-Press Compactor to a compressed air supply. Compactors can also be secured to walls or floors.
Fill the wagon with mixed waste. Once the lid is closed the machine is activated. To open, simply lift the lid and wait for the plate to return. Repeat this process until the wagon is full.
To empty, simply release the handle, wait for the pressing plate to return and roll out the wagon. Bags can be sealed using X-Press Ties and a Mil-tek Bag Strapper.
Yes you can. The Mil-tek X-Press is air-powered, meaning that not only does is there no risk of contamination from oil, it is also extremely quiet.
Mil-tek supplies a stainless steel version of the XP for customers with specialist hygiene standards. Instead of a powered enamel finish, a layer of zinc primer is applied.
The XP range of machines are designed to neatly replace a standard drum-size waste container. This is mounted on a wheeled trolley facilitating simple changing and transport.
As they are air-powered (pneumatic) rather than hydraulic, Mil-tek compactors are extremely quiet (<70 dB). If you have an existing air-line you simply plug the machine and then your existing compressor acts as the engine. If you need to have a compressor installed, a Mil-tek technician will ensure that the compressor is placed at an appropriate distance from the machine.
The X-Press Compactor provides a hygienic and cost effective solution in a busy kitchen environment. Being air-powered, the waste press can be placed in areas where food is prepared as there is no risk of hazardous oil spillages. The black bag trash can be placed directly into the X-Press keeping smells and fluids inside the drum, ensuring a high degree of cleanliness and hygiene.
Ships and offshore rigs are environments where hygiene and space are rigorously controlled. The Mil-tek X-Press Compactor will compact all forms of general waste by up to 90% minimizing the space wasted on waste. The X-Press Compactor models 300 and 400 can be fastened to the floor making them ideal for uneven ground and offshore environments.
Hazardous waste can be compacted directly into the X-Press wagon or the X-Press Compactor can be adapted to fit a standard hazardous waste drum. By mounting the drum on the wheeled trolley, it minimizes the contact staff will have with the material as well as minimizing the potential for leakage.
|Bag height (mm)||600|
|Bag diameter (mm)||570|
|Weight of full bag||<60 kg|
|Material||General / Kitchen Waste|
|Degree of Compression||< 90%|
|Noise level||< 70 dB(A)|
|Pressure||1500 kg at 5 bar|
|Approvals||CE, AS/NZ 4024.1|