Just complete the form below and we'll contact you to answer any questions you have.
Handles large volumes safely and efficiently
Dual cylinders applying constant pressure
Bale plastic, cardboard and bulky material
Automated bale-out mechanism
Extra-wide pressing chamber
Ergonomic and easy to clean
The Mil-tek 509HD (Heavy Duty) has a wide door opening making it perfect for loading large cardboard boxes and other materials. It also has two powerful cylinders applying constant pressure resulting in dense and heavy bales.
The Mil-tek 509HD is used in companies and locations where there is a need for handling a larger amount of waste without taking up much floor space.
The 509HD baler is ideal for loading whole cardboard boxes, eliminating the need for flat packing and regular trips to outside bins/skips. The cardboard bales fit perfectly on to a standard pallet, making them easy to store and transport.
The Mil-tek 509HD can be situated close to where waste is generated, and its safety and operational features makes the 509HD an ergonomic, easy, clean and safe machine to use.
The Mil-tek 509HD is powered by compressed air, either directly from an existing air-line or from a compressor supplied by Mil-tek. This means that the Mil-tek 509HD is free of both electrical and hydraulic components, minimizing the risk of fire and completely eliminating the risk of oil contamination.
An automated bale-out function makes it fast, safe and easy to empty the baler.
Currys is a British electrical retailer operating in the UK and Ireland. They installed a Mil-tek 509HD in store to effectively reduce the amount of space dedicated to waste.
Buildbase is a national builders' merchant with 130 branches throughout the UK. They partnered with Mil-tek to reduce their waste costs and the amount of waste being sent to landfill.
Secor Group are a global logistics and mobility services company. The introduction of a Mil-tek 509HD has improved the logistics of work and use of staff time.
A Mil-tek technician will guide you through installation, which is done by simply connecting your 509HD Baler to a compressed air supply. You are now ready to start minimizing your waste.
Fill the chamber with material and close the door. Once the handle is pressed down, the machine is activated and the minimizing has begun. Repeat until the baler is full.
When the baler is ready to be emptied, tie the bale using the banding, open the lower door and press the Bale Out button to release the bale. You are now ready to start a new bale!
A Mil-tek consultant will guide you in making this decision. What you need to know is the approximate amount of e.g. cardboard you generate every day, in what stream and in what sizes it comes. In addition to this you should know how much space you have available for a machine. This basic information combined with your business set-up forms the basis for evaluating which model machine you need.
Your internal working processes and the data available on your waste streams will provide you with that answer. Together with Mil-tek, we will ensure you find the optimal spot in your workplace.
The machine can stand either indoors or out - most important is that you place the machine so that you sort your waste at source. If you place the machine outside it must be under a roof. Be aware that cold weather conditions can influence the performance of the machine. Your Mil-tek consultant will help analysing the best place to install the machine.
As they are air-powered (pneumatic) rather than hydraulic, Mil-tek balers are extremely quiet. If you have an existing air-line you simply plug the machine and then your existing compressor acts as the engine. If you need to have a compressor installed, a Mil-tek technician will ensure that the compressor is placed at a distance from the machine and then install an air-hose between the compressor and the machine.
Ideal for baling plastic packaging typically used in the transportation and protection of clothing and consumable items. Constant pressure ensures an extremely dense bale is produced that is both easy to handle and easy to recycle. The baler can also be used to recycle smaller volumes of cardboard in small/medium supermarkets, convenience stores and general retail outlets.
The wide door and deep chamber of the Mil-tek 509HD baler means large volumes of cardboard can be baled without the need for breaking down or flat packing. Plastic packaging stored in Mil-tek plastic bag stands can be placed directly into the baler saving time and therefore cost when dealing with packaging waste.
The modern waste technique of segregating and baling packaging waste using strategically placed recycling points has resulted in a significant increase in productivity across a range of organisations. A Mil-tek 509HD baler accompanied by a small plastic baler (such as a model 102 or 205 baler), and strategically placed plastic bag stand can vastly improve logistics where a steady stream of packaging waste is created in multiple areas.
|Bale weight||Plastic: < 400 kg|
|Cardboard: < 300 kg|
|Degree of Compression||85-90%|
|Noise level||< 70 dB(A)|
|Pressure||8500 kg at 8 bar|
|Approvals||CE & AS/NZ 4024.1|
It is FREE and gives access to great features: