Just complete the form below and we'll contact you to answer any questions you have.
The Mil-tek 2102 is a small-footprint micro baler, designed to fit into small and compact locations. where efficient compaction of waste is needed to maintain a clean and safe working environment.
The 2102 baler is an upgrade on the model 102 baler
Along with a range of new EN16500 safety features,it has an added cycle counter, a patented dual-locking system, a faster press-return cycle and a bale-out indicator.
The 2102 baler has an extremely fast pressing cycle of less than 10 seconds, allow quick and continuous loading.
All Mil-tek 2-series waste presses are powered by compressed air, either directly from an existing air-line or from a compressor supplied by Mil-tek.
The compressed air forces constant pressure down upon waste, and patented ECO-Drive technology means that the pressure is evenly distributed. These features ensure the densest, most compact bale possible, with a minimum amount of energy used.
Pneumatic waste presses are free of both electrical and hydraulic components, minimizing the risk of fire and completely eliminating the risk of oil contamination.
The Radisson Blu Hotel, Doha have improved their waste handling process with the help of a sustainable Mil-tek solution. They have reduced the time spend handling waste by 85%.
Ruby Tuesday have revolutionised their waste handling process with the help of a both a Mil-tek cardboard baler and general compactor, reducing their waste and improving back-door security.
Burger King in Belfast has been partnering with Mil-tek for over 10 years. A 102 Baler is used in conjunction with an XP 100 to ensure waste handling is done neatly and efficiently.
A Mil-tek technician will guide you through installation, which is done by simply connecting your new 2102 Baler to a compressed air supply. You are now ready to start minimizing your waste.
Fill the chamber with cardboard or plastic and close the door. Once the handle is pressed down, the machine is activated and the minimizing has begun. Repeat until the baler is full.
When the baler is full, it ready to be emptied. Tie the bale using the banding, open the door and remove from the chamber. You are now ready to start a new bale!
Bales can be stacked and stored until you have enough to have them collected by your local recycler. They take up no more floor space than a sheet of newspaper.
Yes it is. Over the last number of years Mil-tek have been a part of a Health and Safety Executive committee that has been steering the creation of a new safety standard for the safe use of vertical balers. As a result we have made a significant number of improvements to the model 2102 in order to ensure safe use for the end-user. For more information please visit www.miltek.co.uk/EN16500
Yes, you can. Mil-tek has a rental and service program, allowing you to hire a 2102 cardboard or plastic baler machine on a flexible basis. Our rental program includes service from certified Mil-tek Technicians, as well as training, documentation and free collection.
For more information, visit www.miltek.co.uk/rent-balers-compactors
You don't... but we do. Mil-tek have a team of experts who conduct site surveys and waste management audits day in, day out. We use a range of tools and consult with you to determine the most appropriate machine for your company.
Every business is different, including yours.
In order to maximise the lifespan of your baling machine, we recommend that you have a Technician service it at least once a year. Mil-tek technicians have a ready supply of spare parts and will deal with any wear-and-tear to the machines.
Whether you are buying or renting, be sure and talk to your Miltek rep about a service contract.
The small size of the 2102 baler means that it can easily be installed indoors, in storerooms or unpacking areas. With a floorspace footprint of less than half a square metre, it takes up a fractional amount of space.
A strategically placed 2102 baler allows retailers to bale plastic and cardboard inside the unpacking area, reduce the amount of space wasted on waste, and reducing the number of trips to outdoor bins.
A constant flow of ingredients arriving in cardboard boxes can account for up to 60% of kitchen waste. The small-footprint 2102 baler is ideal to handle this as it can easily be installed inside the waste area to facilitate quick and efficient waste handling.
This allows staff to remain onsite, reducing the number of trips to bins and freeing up their time to focus on core tasks. It further improves security by ensuring the back door remains closed.
The 2102 baler has a door opening that is ideal for food boxes, wine boxes and plastic packaging. It's small size ensure the 2102 is flexible enough to easily be installed close to a waste generating area, such production line or unpacking area.
As it is air-powered, the baler can safely be placed in an area where food is prepared or goods are unpacked as there is no risk of hazardous oil spillage. An insert can also be supplied to crush cans and tins with a capacity of up to 30 litres; typical for food, paint or oil cans.
| Height (mm) | 2260 |
| Width (mm) | 775 |
| Depth (mm) | 540 |
| Weight | 220 kg |
| Height (mm) | 470 |
| Width (mm) | 650 |
| Depth (mm) | 450 |
| Bale weight | Plastic: < 60 kg |
| Cardboard: < 35 kg |
| Height (mm) | 475 |
| Width (mm) | 650 |
| Depth (mm) | 415 |
| Degree of Compression | 85-90% |
| Noise level | < 70 dB (A) |
| Pressure | 2250 kg at 8 bar |
| Approvals | CE, EN16500 |
© 2021 All rights reserved. Mil-tek and the Mil-tek logo are registered trademarks of Mil-tek Danmark A/S.
Want the latest news, insights and expert advice from around the industry? Join the conversation or subscribe to our newsletter.
By submitting a form on this website, you are requesting for Mil-tek to contact you directly. Your personal information will be kept securely and remain private.
Should you wish to opt-out from all future communications, please contact a Mil-tek representative or click here
